Kirigami · traditional fold and cut

How to Make a Paper Snowflake

A paper snowflake is a traditional fold-and-cut craft: you fold a square of thin paper into a narrow wedge of twelve layers, cut a few shapes and open it into a six-pointed snowflake, just like a real snow crystal. It takes 7 easy steps and about 7 minutes with scissors, and our simple cut pattern works the first time.

White six-pointed paper snowflake with round and diamond holes on a pale blue background
A six-pointed paper snowflake cut from one folded square.

At a Glance

To make a six-pointed paper snowflake, fold a square in half into a triangle, fold it in half again, then fold it into thirds so you get a narrow wedge. Cut the top off at a slant, cut small notches in both folded edges, snip the tip and unfold it gently.

Difficulty
●●●●● Easy
Steps
7
Time
7 minutes
Paper
One thin square, 15 to 21 cm (6 to 8.5 in)
Finished size
About 14.4 cm (5.7 in) across from 15 cm paper
Age
6+ (an adult helps with the cutting)
Design
Traditional technique, our own cut pattern
On this page
  1. What You Need
  2. How to Make a Paper Snowflake Step by Step
  3. Why Does a Paper Snowflake Have Six Points?
  4. What Size Paper Do You Need?
  5. Easy Paper Snowflake Pattern Ideas
  6. Printable Paper Snowflake Step Sheet
  7. Common Paper Snowflake Problems and Fixes
  8. Ways to Decorate With Paper Snowflakes
  9. Where the Paper Snowflake Comes From
  10. Key Facts
  11. FAQ

What You Need

A paper snowflake needs one square of thin paper and scissors. The folded wedge has twelve layers, so thin paper is the key: origami paper, copy paper, tracing paper or even a coffee filter all work. Thick construction paper is very hard to cut through twelve layers.

Use a square, not a rectangle. If you only have printer paper, fold one corner down to the opposite edge and cut off the extra strip to make a square first.

  • 1 square of thin paper: 15 cm (6 in) origami paper, or printer paper trimmed to a square. Thinner paper cuts more easily through 12 layers.
  • Small, sharp scissors for adults, or child-safe scissors with rounded tips for kids.
  • A pencil (optional) to draw the cut lines on the folded wedge before cutting.
  • A heavy book to press the opened snowflake flat.

How to Make a Paper Snowflake Step by Step

Follow the seven diagrams below. Dashed red lines are valley folds, the dash-dot teal line is a mountain fold, the thick dark line with scissors is a cut line, and the dotted outline shows where the paper ends up. Steps 1 to 3 make the folded wedge; steps 4 to 7 cut and open the snowflake.

  1. Step 1: a light blue square turned as a diamond, with a valley line across the middle and an arrow folding the bottom corner up to the top

    Fold the square into a triangle

    Turn the square so a corner points up, like a diamond. Fold the bottom corner up to the top corner and crease well. You have a triangle with the folded edge at the bottom.

    Line the corners up exactly. Any slip here repeats twelve times in the finished snowflake.

  2. Step 2: a triangle with a thick folded bottom edge, a dot in its middle, a vertical valley line and an arrow folding the right corner to the left

    Fold the triangle in half

    Fold the right corner over to the left corner and crease. The dot in the middle of the folded edge is the center of the paper: it becomes the center of your snowflake.

  3. Step 3: a right triangle with its square corner at the bottom right, a valley line and a mountain line splitting the corner into thirds, arrows and a dotted narrow wedge

    Fold it into thirds

    You have a smaller triangle with a square corner at the center point. Fold the lower part up in front along the red line, then fold the upper part behind along the teal line, so the corner is split into three equal parts. Adjust both folds until the edges line up neatly, then crease.

    Do not crease hard until the three parts are equal. If one part is wider, the snowflake comes out lopsided.

  4. Step 4: the narrow folded wedge with its point at the bottom right, two loose tips at the far end and a thick dark cut line with a small step across it, and scissors

    Cut off the top

    Keep the wedge as it is, with the center point at the bottom right. The loose tips of the paper stick out at the far end. Cut along the thick line through all the layers: it starts on the lower edge, about a third of the way out from the center point, makes one small step and ends high up on the right edge. Keep the part next to the center point and throw the rest away.

    Safety first: children should use child-safe scissors with an adult nearby. Hold the layers tightly and keep your fingers away from the blades.

  5. Step 5: the trimmed wedge with cut lines for a half circle in the short bottom edge, two V notches in the long right edge and a snip across the tip, and scissors

    Cut the shapes

    The kept part has a short folded edge at the bottom and a long folded edge on the right. Make four more small cuts through all the layers: a small half circle in the short bottom edge, two V-shaped notches in the long right edge, and a short straight snip across the very tip at the center point.

    Draw the shapes lightly in pencil first. Keep at least a few millimeters of paper between cuts so the snowflake does not fall apart.

  6. Step 6: the cut wedge with notches and a half circle, with two arrows showing the layers opening

    Unfold very gently

    Let the scraps fall away. Unfold the front flap down toward you and the back flap out behind, then open the remaining folds slowly, one at a time, so the thin parts do not tear.

  7. Step 7: the finished six-pointed paper snowflake with round holes, diamond holes and a hole in the middle

    Your paper snowflake is ready

    Your six-pointed snowflake has round holes, diamond holes and a small hole in the middle. Press it flat under a heavy book for a few minutes, then hang it up.

Why Does a Paper Snowflake Have Six Points?

Real snow crystals have six sides because of the way water molecules lock together when they freeze into ice. Most snowflakes therefore have six arms or six corners, even though every one is shaped a little differently as it falls through the cloud.

The fold on this page copies that symmetry. Folding the square in half twice makes a square corner of 90 degrees at the center, and folding it into thirds cuts it into 30 degree slices. Opening the folds mirrors your cuts twelve times around the center, which gives six identical points. Many quick snowflake folds use quarters instead and give eight points, which looks pretty but is not how real snowflakes grow.

What Size Paper Do You Need?

With our cut pattern, the finished snowflake measures about the same as the side of the square from point to point, a little less because of the top cut. A 15 cm (6 in) square gives a snowflake about 14.4 cm (5.7 in) across, a classic size for a window. The table shows other sizes.

Paper snowflake: paper size and finished size
PaperSquare sideFinished width (point to point)Best for
15 cm (6 in) origami paper15 cm (5.9 in)14.4 cm (5.7 in)Classic window snowflake
20 cm (8 in) square20 cm (7.9 in)19.2 cm (7.6 in)Bigger snowflake, still easy to cut
A4 trimmed to a square21 cm (8.3 in)20.2 cm (7.9 in)Printer paper made square
US Letter trimmed to a square21.6 cm (8.5 in)20.7 cm (8.2 in)Printer paper made square (US)
25 cm (10 in) square25 cm (9.8 in)24 cm (9.4 in)Large ceiling snowflake; use thin paper
7.5 cm (3 in) mini square7.5 cm (3 in)7.2 cm (2.8 in)Tiny snowflakes for cards, fiddly to cut
Finished size computed by Origami911: width (point to point) ≈ 0.96 × paper side. Thicker paper adds a few millimetres.

Easy Paper Snowflake Pattern Ideas

Once you know the fold, change the cuts to make a new snowflake every time. Each idea below is a cut you can add to the folded wedge:

  • Pointed star. Cut the top at a steep slant from the left edge to the top of the right edge for long, sharp points.
  • Round flower. Cut the top in a curve instead of a straight line.
  • Lace edge. Snip several tiny triangles along both folded edges.
  • Heart window. Cut half a heart into the right edge; it opens as six whole hearts.
  • Big center. Snip the tip higher up for a large hole in the middle.

No two hand-cut snowflakes are ever exactly the same, which is half the fun. If you like this kind of craft, the paper doll chain uses the same fold-and-cut idea in a row.

Printable Paper Snowflake Step Sheet

Download all seven diagrams on one page for a classroom, a winter party or a holiday craft table. Print it at 100% on A4 or US Letter, then fold and cut the snowflake from a separate square of thin paper.

Common Paper Snowflake Problems and Fixes

Most snowflake problems come from uneven folds in step 3 or from cuts that go too far. The table lists the usual ones.

Paper snowflake troubleshooting
ProblemWhy it happensHow to fix it
The snowflake has eight pointsThe paper was folded into quarters, not thirdsFold into thirds in step 3 for six points
The points are different sizesThe three parts in step 3 were not equalAdjust the folds until the edges line up before creasing
The snowflake falls apartTwo cuts met, or a cut went across the whole wedgeLeave paper between cuts and never cut all the way across
The scissors will not cut throughThe paper is too thick for 12 layersUse thin origami paper, copy paper or tracing paper
The snowflake tears when openingThin parts were pulled open too fastUnfold one layer at a time
The snowflake will not lie flatThe folds are still creasedPress it under a heavy book for a few minutes
Problems and fixes from our own test folds.

Ways to Decorate With Paper Snowflakes

  • Window snowflakes. Tape them to a window with a small loop of tape behind each one.
  • Hanging from the ceiling. Thread a piece of fishing line or cotton through one point and hang several at different heights.
  • Winter garland. Glue snowflakes along a string for a garland across a mantel.
  • Greeting cards. Glue a small snowflake on dark blue card for a winter card.
  • Gift tags. Use tiny snowflakes from 7.5 cm (3 in) paper as tags on presents.

More winter decorations: hang a paper lantern, fold a paper chain garland or fill a jar with lucky stars.

Several white paper snowflakes taped to a window with a snowy garden outside
Paper snowflakes taped to a window for winter.

Where the Paper Snowflake Comes From

Fold-and-cut paper snowflakes are a traditional folk craft, so nobody owns the technique. Paperfolding historians trace them back to at least the nineteenth century, when cut paper decorations were popular in European homes and schools, and children have made them every winter since. The cut pattern on this page is our own simple geometric design, and you are welcome to invent your own.

Key Facts

  • A paper snowflake is a traditional fold-and-cut craft made from one square of thin paper.
  • It takes 7 easy steps and about 7 minutes with scissors.
  • Folding the square in half twice and then into thirds makes 12 layers and six points, like a real snow crystal.
  • A 15 cm (6 in) square makes a snowflake about 14.4 cm (5.7 in) across with our pattern.
  • Real snowflakes have six sides because of the way ice crystals form.
  • Every cut you make is mirrored twelve times when you open the paper.
Did you know? A half shape cut into a folded edge always opens into a whole shape: a half circle becomes a circle and half a heart becomes a heart, which is how the round holes in this snowflake appear.

Frequently Asked Questions

How do you make a paper snowflake step by step?

Fold a square in half into a triangle, then in half again. Fold the small triangle into thirds to get a narrow wedge. Cut off the top at a slant, cut a few small notches in both folded edges, snip the tip and unfold it gently.

How do you make a 6-pointed paper snowflake?

The secret is folding into thirds. After folding the square in half twice, split the square corner at the center into three equal parts, one folded in front and one behind. The 12 layers open into six points.

Do all snowflakes have 6 points?

Almost all snow crystals have sixfold symmetry, because water molecules freeze into a six-sided pattern. Some are broken, clumped or irregular, but a typical single snowflake has six arms or six sides.

What paper is best for paper snowflakes?

Thin paper, because you cut through 12 layers at once. Origami paper, copy paper, tracing paper and coffee filters all work well. Thick construction paper is too hard to cut when folded.

How do you make a paper snowflake with rectangle paper?

Make the rectangle into a square first. Fold one short edge down to the long edge to form a triangle, cut off the leftover strip, and unfold. Then follow the steps with your square.

Can you make a paper snowflake without scissors?

A fold-and-cut snowflake needs scissors, because the holes and points come from the cuts. Without scissors, you can fold a star or tear tiny notches carefully with your fingers, but the result is rougher.

How do you make paper snowflakes easy for kids?

Use thin 15 cm (6 in) origami paper and child-safe scissors. Let an adult do the folding into thirds, then the child cuts simple shapes such as half circles and triangles. Bigger, simpler cuts are easier for small hands.

How do you hang paper snowflakes from the ceiling?

Poke a small hole near one point, thread fishing line or cotton through it and tape the other end to the ceiling. Hang snowflakes at different heights for a falling-snow effect.

Origami911 Editorial Team
Every model on Origami911 is checked fold by fold in our crease simulator and reviewed step by step, and every diagram is drawn by us. This is a traditional folk model in the public domain; our own cut pattern is by Origami911. Last updated October 2026.